Office Hours

Mon to Fri 7.30am – 4pm

Book a Service

(07) 5580 4311

Hot Water Systems Gold Coast

Repairs, replacements, and new installations – serving the Gold Coast since 1976.

✅ Repair today (no hot water, leaking, tripping power).

✅ Replace today (old unit, rust, repeat valve failures).

✅ Upgrade for lower bills (heat pump, solar, off-peak).

Hot Water Systems Gold Coast Specialist Service – Book Now

🚨 Need Hot Water Repairs Fast? Call (07) 5580 4311 to book a service call from the Hot Water Systems Gold Coast specialists!
📅 Book Non-Urgent Repairs or Service Now – Fill out the form below, and we’ll get back to you shortly to arrange a convenient time.

No hot water feels awful, and it never happens at a good time. If your hot water unit is leaking, cold, or tripping power, call now.

We’ll diagnose it quickly, then provide you with clear options and fixed pricing. No pressure. No guessing. Just the safest, most sensible fix for your home.

We repair, replace, and install electric, instantaneous, solar, and heat pump systems.

We service the Gold Coast, Tweed, and Tamborine – and we turn up ready.

You’ll get your shower back. That’s the goal.

WARNING: "LIKE-FOR-LIKE" HOT WATER PRICES ARE A PRICING SCAM

No hot water feels awful. And that’s when people get caught.

Those unbelievably low “like-for-like” prices often hide the real cost. They often exclude mandatory safety upgrades and legal compliance work. That can put your home at risk. Then it hits your wallet later.

Whywait Plumbing never plays pricing games: You get honest, all-inclusive pricing upfront. No tricks. No shortcuts – just safe, legal, reliable hot water.

Cheaper than cheap online pricing: If the quoted price sounds too good to be true, ask what’s excluded. That’s where the “like-for-like scam” lives. This is the pricing tactic the ACCC consumer regulators warn about. It’s “drip pricing”. Part price first, real price later.

Now scroll the price guide below: Everything is supplied and installed, including all necessary compliance requirements. If you want help choosing, call us, and we’ll point you to the right option fast.

As we like to say: “Choose Whywait, and consider it done.”

What's often missing from cheap "like-for-like" quotes

❌ Temperature control safety (anti-scald protection).

❌ Legally required valves and compliant pipework.

❌ Electrical isolation or upgrades, when needed.

❌ Safe discharge pipework and correct termination.

❌ Removal and legal disposal of the old unit.

❌ Commissioning, testing, and paperwork.

In Queensland, temperature control devices are legally required in most situations. That’s safety. That’s compliance. Not an optional “extra”.

Gold Coast Hot Water System Price Catalogue

Gold Coast Hot Water System Price Catalogue
Scroll the options below, and you’ll see real, supplied-and-installed pricing. No mystery numbers.

Prices are current as of 10 January 2026.
Not sure what to choose? Call us now. We’ll ask a few quick questions and steer you to the safest, best-value option for your home.

Quoted price notes
Prices include standard external installation (and internal installation for instant electric systems). Indoor storage units or non-standard work may need extra parts and labour. We confirm any extras upfront, before work begins. No surprises, and no pricing games.

icon for electric hot water systems

We provide a wide range of electric hot water systems.

✅ Fully QBCC-Compliant Electric Hot Water Installations

All hot water system installations by Whywait Plumbing comply with QBCC compliance standards. Every installation includes:

✅ 15mm copper pipe, brass fittings & Kempress press fittings

✅ Polyslab support base

✅ Cold water non-return valve

✅ Cold water expansion valve

✅ Hot water relief valve

✅ Cold water isolation valve

✅ Cold water pressure limiting valve

✅  Tempering valve

✅ Pipework insulation where required

✅ Official QBCC Form 4 Compliance Certificate

We never cut corners. You get a fully compliant, professionally installed system every time.

PRICES SUPPLIED & INSTALLED

50 Ltr

80 Ltr

125 Ltr

250 Ltr

315 Ltr

Rheem

50 Ltr
$2334.87
80 Ltr
$2508.51
125 Ltr
$2583.72
250 Ltr
$2907.32
315 Ltr
$2979.68

Rinnai

50 Ltr
$2329.03
80 Ltr
$2665.07
125 Ltr
$2630.07
250 Ltr
$2643.42
315 Ltr
$2769.87

Vulcan

50 Ltr
$2058.52
80 Ltr
$2327.66
125 Ltr
$2324.75
250 Ltr
$2534.65
315 Ltr
$2608.34
icon for instant electric hot water systems

Want continuous hot water but don’t have a gas connection? Our electric instant gas hot water systems are what you’re looking for.

✅ Fully QBCC-Compliant Instantaneous Electric Hot Water Installations

All hot water system installations by Whywait Plumbing comply with QBCC compliance standards. Every installation includes:

✅ 15mm copper pipe, brass fittings & Kempress press fittings

✅ Cold water pressure limiting valve

✅ Connection to the existing electrical connection only

✅ Cold water isolation valve

50℃ preset tempered hot water

✅ Pipework insulation where required

✅ Official Queensland Government QBCC Form 4 compliance certificate

We never cut corners. You get a fully compliant, professionally installed system every time.

PRICES SUPPLIED & INSTALLED

14 kW / 25 Amp

19 kW / 27 Amp

29 kW / 50 Amp

Rinnai Efinity

3 Phase 50°C
$2110.20
3 Phase 50°C
$2175.55

Rinnai Efinity

3 Phase 60°C
$2195.90
3 Phase 60°C
$2210.23
3 Phase 60°C
$2305.84

Single Phase

Three Phase 27 Amp

Three Phase 40 Amp

Stiebel Eltron

DHCE6/50
$2104.40
DHE 18 AU
$2543.43
DHE 27
$2593.70

Stiebel Eltron

DHCE8/50
$2137.27
DEL 18 Plus
$2667.46
DHB-E27 LCD
$2570.14
icon for heat pump hot water systems

Want to reduce your carbon footprint and save money on your power bills? Our heat pump hot water systems are the perfect solution for you!

✅ Fully QBCC-Compliant Heat Pump Hot Water Installations

All hot water system installations by Whywait Plumbing comply with QBCC compliance standards. Every installation includes:

✅ 15mm copper pipe, brass fittings & Kempress press fittings

✅ Polyslab support base

✅ Cold water non-return valve

✅ Cold water expansion valve

✅ Hot water relief valve

✅ Cold water isolation valve

✅ Cold water pressure limiting valve

✅  Tempering valve

✅ Pipework insulation where required

✅ Official QBCC Form 4 Compliance Certificate

We don’t cut corners—ever. You get a fully compliant, professionally installed system every time.

PRICES SUPPLIED & INSTALLED

UNIT

PRICE SUPPLIED & INSTALLED

Rheem Ambiheat HDc-270 Ltr

$5594.25

Rinnai Enviroflow 265 Ltr

$5292.33

Rinnai Enviroflow 215 Ltr

$5410.83

Stiebel Eltron 220 Ltr

$5820.09

Stiebel Eltron 302 Ltr

$6179.49

Important Installation Conditions

These conditions apply to all hot water system pricing on this page. They protect your home. They also protect you from “cheap quote” surprises.

✅ Residential pricing only: Prices listed are for domestic installations only. Commercial sites often need extra compliance work. We’ll quote commercial jobs separately.

✅ Installation Assumptions: Prices are based on the assumption that the new hot water system is installed in the exact location and is comparable in size and type to the previous system. All installations are performed to meet current standards, including AS/NZS 3500.4:2025 Heated Water Services and the Plumbing & Drainage Act 2018 (QLD).

✅ Electrical services must already be safe and compliant: The existing electrical infrastructure must meet current legal standards. If upgrades are required for safety or compliance, additional charges will apply. We’ll explain why. We’ll determine the price before work begins. No surprises.

✅ Tempering valve safety requirement: Tempering valves are mandatory on all replacement hot water system installations to ensure safe water temperatures.

✅ Relief and expansion valve drainage compliance: As required by QBCC and AS/NZS 3500, all installations must include relief and cold water expansion valves. Hot water safety valves must drain to an approved discharge point. We don’t run valve drains onto the ground as a “quick fix”. That’s messy, unsafe, and often non-compliant.
We do it properly, every time. (You’ll see this shown in QBCC guidance for electric hot water installs.)

✅ Power point installation for instantaneous systems: Some instantaneous systems need a nearby power point. If one is required, we’ll tell you straight away. We can arrange a licensed electrician where needed. You’ll get the cost before anything happens.

✅ Outdoor installations assumptions: Catalogue pricing is based on standard external installation. Instant electric systems may be installed internally in standard conditions. Indoor storage units, tight access, or non-standard work can add cost. We’ll flag every extra before we start. Always.

Electrical compliance when replacing electric hot water systems

Electrical work must comply with the Wiring Rules (AS/NZS 3000:2023), including any applicable amendments.

When upgrades are often required

The unit is relocated.

The electrical load changes (for example, a larger element).

Existing wiring or protection is non-compliant.

An RCD (safety switch).

A compliant weatherproof isolator, located correctly.

Who does what

Our restricted electrical licence only covers disconnecting and reconnecting the heater. We don’t install new fixed wiring devices under that licence.

If upgrades are required, we will advise you. We can also arrange a licensed electrician to complete the work.

Cost guide

Budget $250–$950 for common electrical upgrades.

If wiring is unsafe, it must be corrected before power-on.

That can add cost, and we’ll talk you through it.

Need straight answers fast? Call 07 5580 4311. We’ll guide you, no jargon, no pressure.

Whywait plumber doing hot water system repairs on the Gold Coast
Coomera Plumbers

Do you have Hot Water System Problems? We treat them as emergencies call us 7 Days a Week to book a service call!

No hot water feels miserable. Cold showers, stressed mornings, cranky kids. It’s a lot.

At Whywait Plumbing, we’re trusted hot water repair specialists across the Gold Coast.

We’ve been serving our clients since 1976, and we take your comfort seriously.

🚨 Priority, same-day help (when available) to get your hot water back up and running fast. After all, everyone deserves a hot shower when they come home!

We’ve got you covered. We repair heat pumps, instantaneous hot water systems, electric hot water systems, and solar hot water systems.

🛠 With our team of licensed plumbers, you can be confident in our ability to handle all your hot water system needs.

👨‍👩‍👧‍👦 We can repair, replace, install, inspect, and service all systems, ensuring that your hot water is in safe hands.

📅 Need a replacement or upgrade? Depending on your chosen system, we can replace your old system the same day, providing you with a quick and hassle-free solution.

Why choose Whywait Plumbing for Hot Water Systems today?

You shouldn’t have to “hope” your hot water works.
You should be able to trust it. Every day. Even on the worst mornings.

Trusted across the Gold Coast
You’ll spot Whywait service tags on thousands of tanks in local homes and businesses. That kind of trust is earned, job by job.

Reliable hot water solutions
We focus on safe repairs and compliant installations, so you’re not left without hot water again next week. Or next month.

We help your system last longer
We don’t just fix the problem and disappear. We can service and maintain your system to reduce breakdowns and extend its life.

When you choose Whywait Plumbing, you’re selecting a team that prioritises your needs.

Clear advice. Upfront pricing. Work done properly.

Call now, and we’ll help you choose the right fix or replacement, fast.

Choose Whywait, and consider it done.

Don’t wait

If your unit is leaking, cold, or malfunctioning, call us now.

We’ll diagnose it quickly, explain your options clearly, and quote upfront.

Book your hot water repair or installation today, and consider it done.

Whywait plumber doing hot water system installation on the Gold Coast

We service and replace most major hot water brands used across the Gold Coast, including:

Rheem hot water systems Gold Coast
Vulcan hot water systems Gold Coast
Rinnai hot water systems Gold Coast
Dux hot water systems Gold Coast
Bosch hot water systems Gold Coast
Aquamax hot water systems Gold Coast
Stiebel Eltron hot water systems Gold Coast

Got something different? Call us anyway.

If possible, please tell us the brand and the number of litres (or send a photo of the data plate).

Call Whywait Plumbing Now for Fast Hot Water Repairs and Replacements on the Gold Coast

Hot Water System Repairs, Replacements, Installations, and Servicing for the Gold Coast, Tweed, and Tamborine

🚨 No hot water? Water too cold? Tank leaking? We’ve got you covered.

When your hot water system fails, it disrupts everything. Morning routines. Work. Sleep.
Whywait Plumbing is here to repair, service, and replace your system fast. With priority same-day help when available, including weekends and after-hours.

Because everyone deserves a proper hot shower. Honestly.

✔ Same-Day Hot Water Repairs (when available)

No hot water, low pressure, lukewarm water, strange noises, leaks. We’ll diagnose it quickly and restore your comfort.

⚡ Fast Replacements and Upgrades

If your system needs to be replaced, we’ll aim to install a new unit on the same day, depending on stock availability and site access.

If your preferred unit isn’t available, we’ll discuss safe alternatives with you. In some cases, we can set up a temporary solution to ensure you’re not without hot water.

🔧 After-Hours Help

Our licensed plumbers (and electricians, when required) can assist with urgent hot water problems outside standard hours.

💰 Upfront pricing

You’ll get clear options to suit your budget, with pricing explained before we start. No surprises. No pricing games.

🔍 We service most major brands

Rheem, Vulcan, Rinnai, Bosch, AquaMax, Thermann, Saxon, Dux, Solahart, and Edwards.
Not sure what brand you have? Tell us the litres, or send a photo of the data plate, and we’ll guide you fast.

📞 Contact us today to explore upfront options and schedule a booking time that suits you.
The Whywait Plumbing Van on the Gold Coast

Need a Hot Water Service Call on the Gold Coast Today?

🚨 Call Whywait Plumbing now. If you’ve got no hot water, a leak, or a system fault, we’ll help fast.
You’ll speak to a real person, get clear options, and upfront pricing before work begins.

❓Hot Water System Frequently Asked Questions Whywait Plumbing Are Asked Every Day

We supply and install electric, continuous flow, solar, and heat pump hot water systems. Each has advantages depending on your water usage, budget, and property setup.

  • 🔌 Electric systems are the most affordable upfront. Larger systems on the T33 tariff can be economical, but smaller systems on T31 can lead to higher power bills. Note: Recovery times once the tank is empty take 30–60 minutes, depending on element size and tank capacity.
  • ☀️ Solar systems offer positive long-term savings if you stay home for 7+ years. However, if hot water runs out without sun, you’ll have to wait until the booster kicks in overnight.
  • 🌬️ Heat pumps use up to 75% less energy than electric models but come with a higher upfront cost and ongoing maintenance. Heat pump systems require storage tanks and are very efficient but need all the valves identical to those of an electric storage system. They may not be ideal for everyone.

     

Depending on the availability of your chosen unit, we can offer same-day installation across the Gold Coast, but in most cases, we aim for replacement by the next day. We stock a wide range of units to restore your hot water quickly.

Yes. We supply, install, and fully commission your new system to meet AS3500 Plumbing Standards and Council regulations—including all required valves and Form 4 certification with the QBCC.

We normally do the following:

  1. Safely disconnect and drain the old unit

     

  2. Remove outdated pipework and fittings.

     

  3. Install the new system with all compliant valves (tempering, TPR, pressure-limiting, etc.)

     

  4. Lag all hot pipework to reduce heat loss.
  1. Remove and dispose of your old storage tank.

And for your peace of mind we submit a QBCC Form 4 compliance certificate and pay all the fees.

Prices vary depending on system type, size, and your current plumbing setup. Call us, and we’ll help you choose the best option and provide a detailed, fixed quote.

Yes. All installations meet the Plumbing and Drainage Act 2018 and current AS3500 Plumbing Standards—including mandatory tempering valves, expansion controls, and compliant overflow discharge.

Key valves (TPR, tempering, pressure-limiting) should be replaced every 5 years. The TPR valve should be manually lifted every 6 months, and the sacrificial anode should be checked between years 5 and 7, depending on water quality.

Yes! We provide 24/7 emergency service across the Gold Coast with rapid diagnostics and immediate repairs or replacements where needed.

We’ve been helping Gold Coast families since 1976. We only use our employees who are all licensed plumbers, no subcontractors, and honest advice. We don’t just install hot water systems—we help you make the right long-term choice.

CALL NOW
CALL NOW